in the new firmware 1.0.0322, you will find the feature of anti-interference setting. Here we give the guide for this part configuration.
Fix Noise Floor
This option is mostly applied to access po ...
Condition 1: if you have static Internet IP for your controller
a. Run the cloud director on a PC which isin the same subnet with WCAPb. Press Scan,after AP shown on the list, press Configurec. Pre ...
Set up several VLAN that each VLAN for thedifferent department of a company on the AP.
Here are the steps.1, First enter the management window. Click the NETWORK - VLAN - Add.
2, Put in the VLAN ID ...
Basically, if you still remember the IP range like 192.168.1.x, you can use our Wimanager to scan the IP address. But if you change the IP to 10.x.x.x style and totally forgetting the IP range, here i ...
The video is showing how to use WiController to apply configuration tomultiple devices. Check the WiController manualfor choosing the device type before applying the settings!